Links to the interesting projects/blogs of others. [Updated 2020-03-12]

I tend to change computers a lot so I thought I'd get two birds with one stone by posting the links to cool projects done by others here. This way I won't lose my links whenever I change out my computer and you can also have something to read.
[I'll keep adding links to this list as I find them]

https://simplifier.neocities.org/index.html
http://www.teralab.org/index.htm
http://ecorenovator.org/forum/conservation/891-diy-ventilation-heat-exchanger-18.html#post18665
http://lordsqueak.blogspot.lt/2009/08/homecooked-diy-heatpipes.html
http://www.mikesflightdeck.com/instruments/diy_aircore_instruments.html
http://www.sparkbangbuzz.com/
http://tesladownunder.com/index.html

2020-03-12 update:
https://kronoshacker.blogspot.com/
https://halestrom.net/darksleep/
https://charleslabs.fr/en/projectlist
http://www.155la3.ru/k224_2.htm
https://eecaldas.wordpress.com/
http://vu2ppp.com/home
https://www.tinaja.com/whtnu20.shtml
https://kaizerpowerelectronics.dk/
http://www.hpfriedrichs.com/radioroom/vfd/rr-vfd.htm
https://cpldcpu.wordpress.com/
https://ognite.wordpress.com/

Komentarai

Rašyti komentarą

Populiarūs šio tinklaraščio įrašai

Playing with junk: the SN29764 (LM1017) 4-bit binary 7-segment display driver.

Vaizdas
    While digging through my parts bins looking for my spare arduino nano I came across a boart that I was keeping solely for the 7-segment display that was attached to it. I noticed that there also was an IC marked SN29764 on the board and got curious. After some googling I came up with a LM1017 datasheet, which states that it's an equivalent to the SN29764.      Basically what this IC does is it takes a 4-bit binary number through pins 2, 3, 4 and 5, and displays that number on a 7-segment display. Since this IC was made to display channels on a TV it doesn't display the number 0 but it displays numbers from 1 to 16. Pulling pin 1 down sets the display to full brightness.     I find it quite interesting that there would be a dedicated IC for this application but the world proves to be quite large and technology has sure advanced since the old days. There isn't a date code I can read on the IC but it might very well be older than me even, well I'm not even that old so
Skaityti daugiau

Infrared RGB LED controller using Digispark (Attiny85).

Vaizdas
    While building a PC I thought I'd toss in some RGB to see how it looks. Problem is I had lost the receiver. Bummer! But I still had the remote, so I decided to make my own RGB controller. For this project I chose to use the Digispark, which is like an arduino but is based on the Attiny85. A regular arduino like the arduino nano, or even any other microcontroller like the STM32 "blue pill" can be used for this project. In this case I wanted a small microcontroller, something like an atmega328p would have been a bit of an overkill.     Before I could make my microcontroller do anything I had to find out what my remote was transmitting. To do this I used my OWON VDS1022 USB oscilloscope, with which I saved the samples of the waveform in a .txt file. The bitrate of the signal transmitted by the remote is quite low so something like a DIY audiojack oscilloscope (look it up) would work also. The .txt file then was passed through a matlab script I quickly put togeth
Skaityti daugiau

Modding a laptop power brick into a lithium pack charger and some Manhattan style prototyping.

Vaizdas
      I've built a few 4S lithium battery packs but I didn't have a charger. So I decided to make one by modifying a switch-mode power supply. The power supply I used had a special plug on it with three pins. One of them being a sense pin to change the voltage. On this plug an adapter would connect, which would have a resistor in it that would change the voltage on the output. This power supply is nothing special, though. All this wire does is go straight to the REF pin on the TL431 reference IC inside. How do I know that? Because I accidentally blew the TL431 and had to pull the power supply apart to replace it. If you're willing to pull apart a laptop power supply you can add this wire to the TL431 reference and you'll have basically the same thing I have.     Opening them can be a pain. Mike from mikeselectricstuff shared in one of his youtube videos that whacking the weld/glue seam on the power supply will crack the joint and the power supply will come apart. But I&
Skaityti daugiau